無標題文件

A generator, transducer, and tank make up an ultrasonic cleaning system, and
Crest's systems are designed to provide the most effective precision cleaning results

Genesis™ Generators

MODEL: XG-

INTRODUCTION:

Outstanding and consistent performance, process control and the ability to monitor output for consistent cleaning time after time.
TRU-SWEEP™ sweep frequency eliminates inconsistent cleaning by sweeping a +/- 1kHz around the center frequency at a set repetitive rate.
Standard two power options to vary cleaning from gentle for delicate parts to periodic short blasts of power for hard to clean parts.
3 controls including Amplitude control to vary ultrasonic power, Duty Cycle Control to control the amount of ultrasonic energy delivered and Frequency control to adjust the frequency of the ultrasonic energy reducing audible noise from subharmonics.
Available in 25, 40 or 68 kHz frequencies and in either 250 or 500 watt models.

SPECIFICATION:

Model	Power Output (W)	Max. Power Input 120V/50-60Hz	Dimensions LxWxH (cm)	Number of Plug-in Modules
XG-250-3	250	3A/ 360W	13.3x35.6x30.5	1
XG-500-6	500	5A/ 600W	13.3x35.6x30.5	1
XG-750-9	750	8A/ 960W	26.7x35.6x30.5	2
XG-1000-12	1000	10A/ 1200W	26.7x35.6x30.5	2
XG-1500-18	1500	15A/ 1800W	40.1x35.6x30.5	3
XG-2000-24	2000	20A/ 2400W	53.3x35.6x30.5	4

NOTE: Prefix X in model number should be substituted with a 2 (for 25 kHz) or 4 (for 40 kHz) when ordering. Last digits in model number indicate the number of Vibra-Bars on the unit.

Transducerized Tanks

MODEL: XHT-

INTRODUCTION

Provides the optimum environment for precision cleaning with extended service life.
Constructed of cavitation resistant, bright annealed 316L stainless steel.
Welded inside and out for long-term stability and sturdy performance.
Cove corner construction with ground and polished welds available.
Sloped bottoms for easy draining.

SPECIFICATION:

Model No. (Heater)	Capacity (gallons)	Internal Dimensions WxLxD (cm)	Overall Dimensions WxLxD (cm)	Power Req. (heated tank)	Generator Required
XHT-710-3	3	17.8X25.4X25.4	25.4X33X36.8	120v/ 4.2a/ 500W	250W
XHT-1014-6	5	25.4x35.6x25.4	33x43.2x36.8	120V/ 8.4A/ 1000W	500W
XHT-1218-9	10	30.5x45.7x30.5	38.1x53.3x41.4	240V/ 8.4A/ 2000W	750W
XHT-1524-12	19	38.1x61x35.6	45.7x68.6x47.8	240V/ 12.6A/ 3000W	1000W
XHT-1622-12	22	40.6x55.9x40.6	48.3x63.5x47.8	240V/ 12.6A/ 3000W	1000W
XHT-1826-18	33	48.7x66x45.7	53.3x73.7x57.9	240V/ 16.8A/ 4000W	1500W
XHT-2426-30	49	61x66x50.8	68.6x73.7x61	240V/ 21A/ 5000W	2500W
XHT-2436-42	68	61x91.4x50.8	68.9x99x61	240V/ 34A/ 8000W	3500W
XHT-2446-54	86	61x116.8x50.8	68.9x124.5x61	240V/ 42A/ 10000W	4500W
XHT-1236-24	34	30.5x91.4x50.8	38.1x99x61	240V/ 17A/ 4000W	2000W
XHT-1246-30	43	30.5x116.8x50.8	38.1x124.5x61	240V/ 21A/ 5000W	2500W

Vibra-Bar™ Transducers

MODEL: XCI-

INTRODUCTION:
These specially bonded, durable transducers offer enhanced cleaning performance. The Vibra-Bar design consists of two transducer stacks which permit simultaneous multiple frequencies. They are available in the form of transducerized tanks and separate immersibles which are fully sealed so they can be inserted into an existing tank to convert it into an ultrasonic cleaning system.